Difference between revisions of "Spinner Turn Count"
(→Data) |
(→Data) |
||
| Line 41: | Line 41: | ||
|- | |- | ||
| Arkanoid || 486 || 486 || Geared: The knob attaches to shaft #1, which has a 72 tooth gear on it. That gear turns a 16 tooth gear on shaft #2. Shaft #2 also has a 72 tooth gear on it, which then turns a 16 tooth gear on shaft #3. Shaft #3 also has the encoder wheel on it, which has 24 teeth. 120-130 deg = one traversal across the screen | | Arkanoid || 486 || 486 || Geared: The knob attaches to shaft #1, which has a 72 tooth gear on it. That gear turns a 16 tooth gear on shaft #2. Shaft #2 also has a 72 tooth gear on it, which then turns a 16 tooth gear on shaft #3. Shaft #3 also has the encoder wheel on it, which has 24 teeth. 120-130 deg = one traversal across the screen | ||
| + | |- | ||
| + | | Aztarac || || 4x || Same spinner as Mad Planets | ||
|- | |- | ||
| Blasteroids || 72 || 288 || LETA 4x (schematic) | | Blasteroids || 72 || 288 || LETA 4x (schematic) | ||
| Line 76: | Line 78: | ||
| Turbo || || || 2 1/2 turns to go across the screen | | Turbo || || || 2 1/2 turns to go across the screen | ||
|- | |- | ||
| − | | Mad Planets | + | | Mad Planets || || 1x || |
|- | |- | ||
| Subs <br> Monte Carlo <br> Super Sprint <br> Drag Race <br> Fire Truck || 36 || || | | Subs <br> Monte Carlo <br> Super Sprint <br> Drag Race <br> Fire Truck || 36 || || | ||
Revision as of 11:28, 20 September 2008
Purpose
This is intended to be a page to keep track of the correct turns ratio of spinner/dial/paddle/trackball-controlled arcade games. Below is comma-separated text, hopefully this is a useful format.
Q: How do I use this information?
A: To tweak the analog sensitivity in MAME to better emulate real hardware.
An example from the first link below:
Tempest, 72 count
if the control you use has 1200 counts per turn, the sensitivity calculation is: Sensitivity = 100 * 72 / 1200 = 6%
Links (Recommended Reading)
http://forum.arcadecontrols.com/index.php?topic=61381.0
http://forum.arcadecontrols.com/index.php?topic=23967.0
http://forum.arcadecontrols.com/index.php?topic=42401.msg474159#msg474159
Data
Effective_Tooth_Count = teeth that pass through the optical sensor per revolution of the knob (multiply by any gear ratios to obtain)
Counts_Per_Revolution = could be 1x, 2x, or 4x of the Effective_Tooth_Count (depends on original hardware interpretation of optical sensor information)
Other_Notes = quantitative information relating to game play (like degrees of turn from one side of the screen to another - useful for potentiometer games like Warlords)
| Game | Effective_Tooth_Count | Counts_Per_Revolution | Other_Notes |
|---|---|---|---|
| 720 degrees | 72 | 144 | LETA 2x (schematic) |
| Arkanoid | 486 | 486 | Geared: The knob attaches to shaft #1, which has a 72 tooth gear on it. That gear turns a 16 tooth gear on shaft #2. Shaft #2 also has a 72 tooth gear on it, which then turns a 16 tooth gear on shaft #3. Shaft #3 also has the encoder wheel on it, which has 24 teeth. 120-130 deg = one traversal across the screen |
| Aztarac | 4x | Same spinner as Mad Planets | |
| Blasteroids | 72 | 288 | LETA 4x (schematic) |
| Crater Raider | 64 | 64 | |
| Dark Planet | 64 | 64 | 6-bit rotary encoder |
| Disks of Tron | 128 | ||
| Ivan Ironman Offroad | 154.286 | Geared: 60 teeth on the steering wheel shaft, meshes with a 14 tooth gear on the encoder shaft, which has 36 teeth on its encoder wheel | |
| Kick / Kickman | 12 | Ball-shaped roller. | |
| Off the Wall | 128 | 256 | LETA 2x (schematic) |
| Omega Race | 64 | 64 | Omega Race uses a 6-bit (64-position) rotary encoder |
| Pole Position Pole Position II |
102 6/7 | 102 6/7 | Geared: 60 tooth gear on wheel shaft, 14 tooth gear on 24 tooth encoder disk shaft => (60 / 14) * 24 = 102 6/7 |
| Revenge of DOH | 486 | 972 | Same spinner as Arkanoid |
| RoadBlasters | 154 2/7 | Wheel/Yoke: 60 tooth gear turns 14 tooth gear with 36 tooth encoder disc. Limited angle of rotation. | |
| Super Speed Race | 64 | 64 | 6-bit rotary encoder |
| Tempest | 72 | 72 | 1 full turn moves 5 spaces on first screen |
| Tron | 128 | 128 | |
| Two Tigers (conversion) | 64 | ||
| Tac/Scan Star Trek Zektor |
All use the same spinner | ||
| Turbo | 2 1/2 turns to go across the screen | ||
| Mad Planets | 1x | ||
| Subs Monte Carlo Super Sprint Drag Race Fire Truck |
36 | ||
| Sprint | 36 | 36 | |
| Championship Sprint APB |
36 | 72 |
Trackball Hardware
| Trackball | resolution | Notes |
|---|---|---|
| Happ 2.25 inch trackball | 149.2 (no wear) | 2.25 inch ball, 0.362 inch roller, 24 tooth encoder disc |
| Happ 3 inch trackball | 167.4 (no wear) | 3 inch ball, 0.43 inch roller, 24 tooth encoder disc |
| Atari 4.5 inch trackball | 330.6 (no wear) | 4.5 inch ball, 0.49 inch roller, 36 tooth encoder wheel |
Trackball Games
| Game | Trackball | Multiplier | Notes |
|---|---|---|---|
| Crystal Castles | Midi-Trak | 2x | |
| Marble Madness | Midi-Trak | 4x | |
| Rampart | Midi-Trak | 2x |
Pot Based
| Game | Gear Ratio | Other_Notes |
|---|---|---|
| Warlords | 1 | 120-130 deg one traversal end to end of castle |
| Final Lap | 2/3 | |
| Moto Frenzy | 1 | |
| Breakout | 1 | |
| Super Breakout | 1 | 120-130 deg one traversal across the screen |
| Star Wars | 15/7 (left/right) 30/7 (up/down) | Yoke |
| Paperboy | 30/7 (left/right) 30/7 (up/down) | Yoke |
Trackball Games: Game Name, Notes
Crystal Castles, 1st screen BB moves length of line above his head from center of trackball moved to one side
Centipede, 1 trackball move 1 end to other (stock tb) 2 1/2 mushroom lengths
Missile Command 1 full end to end visible trackball movement goes from left to the right of the little bump after the missile base
Atari LETA Chip:
several of Atari's optical-control games used the LETA quadrature-decoder chip. It could be set to a 2x or 4x resolution. Therefore all of the below games are either 2x or 4x.
Major Havoc
Marble Madness
Crystal Castles
Rampart
Off The Wall
Blasteroids
720
Championship Sprint
APB
