Difference between revisions of "JAMMA"

From BYOAC OLD Wiki
Jump to navigation Jump to search
 
(added photos, jamma pinout and a little more info)
Line 1: Line 1:
 +
[[image:Brjammaharness.jpg|100px|left]]
 +
[[image:Jamma-pinout.gif|thumb|144px|JAMMA Pinout from BitWalk.com]]
 
JAMMA (Japan Arcade Machine Manufacturers' Association) is a standard 56-way connector used on many arcade boards to simplify conversion of cabinets from one game to another. The majority of newer games use a subset of this pinout. Some games (i.e., Street Fighter) which need extra buttons have extra connectors for these additional controls. The JAMMA connector has a .156" pin spacing edge connector (male on the game board).  The JAMMA standard was invented in 1985; any game older than this will not be JAMMA.
 
JAMMA (Japan Arcade Machine Manufacturers' Association) is a standard 56-way connector used on many arcade boards to simplify conversion of cabinets from one game to another. The majority of newer games use a subset of this pinout. Some games (i.e., Street Fighter) which need extra buttons have extra connectors for these additional controls. The JAMMA connector has a .156" pin spacing edge connector (male on the game board).  The JAMMA standard was invented in 1985; any game older than this will not be JAMMA.
 +
 +
<br><br><br>
 +
 +
[[image:Namco2Jamma.jpg|left|thumb|100px|Namco to JAMMA harness]]
 +
To connect older non-JAMMA games to a standard JAMMA cabinet need a custom wiring harness is needed. In some cases a pre-made convertor harness could be used (the Namco2Jamma convertor shown is available from mikesarcade.com).
 +
 +
'''Relevant links:'''<br>
 +
[http://homearcade.org/BBBB/jh.html| What To Do With Your JAMMA Harness by Bob Roberts]

Revision as of 12:43, 22 February 2006

Brjammaharness.jpg
JAMMA Pinout from BitWalk.com

JAMMA (Japan Arcade Machine Manufacturers' Association) is a standard 56-way connector used on many arcade boards to simplify conversion of cabinets from one game to another. The majority of newer games use a subset of this pinout. Some games (i.e., Street Fighter) which need extra buttons have extra connectors for these additional controls. The JAMMA connector has a .156" pin spacing edge connector (male on the game board). The JAMMA standard was invented in 1985; any game older than this will not be JAMMA.




Namco to JAMMA harness

To connect older non-JAMMA games to a standard JAMMA cabinet need a custom wiring harness is needed. In some cases a pre-made convertor harness could be used (the Namco2Jamma convertor shown is available from mikesarcade.com).

Relevant links:
What To Do With Your JAMMA Harness by Bob Roberts