Difference between revisions of "Video Output"
m (→Component) |
m |
||
| Line 1: | Line 1: | ||
| − | |||
==Coaxial== | ==Coaxial== | ||
| Line 5: | Line 4: | ||
| − | ==Composite Video== | + | ==Composite Video (RCA)== |
Composite video uses a single wire, usually colored yellow on the ends, to carry a video signal. This is the lowest quality method of connecting a video source to a monitor. These types of connectors are rapidly becoming obsolete as they are replaced by S-video, Component video, and DVI. | Composite video uses a single wire, usually colored yellow on the ends, to carry a video signal. This is the lowest quality method of connecting a video source to a monitor. These types of connectors are rapidly becoming obsolete as they are replaced by S-video, Component video, and DVI. | ||
Revision as of 01:01, 3 March 2006
Coaxial
Coaxial wiring is commonly used in home cable systems. It carries sound and video over a single wire. For interconnecting audio and video components, and for connecting game consoles, this has become mostly obsolete.
Composite Video (RCA)
Composite video uses a single wire, usually colored yellow on the ends, to carry a video signal. This is the lowest quality method of connecting a video source to a monitor. These types of connectors are rapidly becoming obsolete as they are replaced by S-video, Component video, and DVI.
S-Video
S-Video works by separating the chrominance (color) and luminance (brightness) into two seperate pairs of wires. This leads to a higher quality picture than composite. While it is more advanced than its earlier cousin, s-video is also on its way out, in favor of DVI and Component connections
Component Video
Component video consists of three seperate wires, each transmitting one of the three colors used in televisions and monitors. Because all three colors are not combined into one wire, the signal strength and picture quality is much higher. This is one of the few dominant video interfaces on the market today.
