Control panel hole sizes

From BYOAC OLD Wiki
Revision as of 19:07, 28 January 2008 by FhM (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0 -FhM

Component Hole Size Required Recommended Tool Additional Notes
Push Button Holes
Happs Standard Pushbutton 1 1/8" Fostner Bit, Hole Saw
Happs Mini Pushbutton 1/2" Drill Bit fits styles A, B, and C
Happ Sub-Miniature Pushbuttons 5/16
Leaf Buttons 1 5/32 Fostner Bit, Hole Saw 1 5/32 is perfect but 1 3/16 will work
Atari Volcano Pushbutton 29/64" standard drill bit
Standard Sanwa/Seimitsu buttons 30mm
Small Sanwa buttons 24mm
Trackball Center Holes
Betson 2.25" Trackball (lip exposed) 2 1/4" Hole Saw hole needed for lexan overlay
Betson 2.25" Trackball (ball exposed only) 1 15/16"" Hole Saw hole needed for lexan overlay
3" Happs Trackball Standard (expose lip) 3" Hole Saw Hole needed for lexan overlay
3" Happs Trackball Highball (expose lip) 3 1/4" Hole Saw hole needed for lexan overlay
3" Happs Trackball Standard (expose only ball) 2 7/8" Hole Saw hole needed for lexan overlay
3" Betson Imperial Trackball (expose lip) 2 7/8" Hole Saw hole needed for lexan overlay
Joysticks
UltraStick360 Joystick 1 1/8" Fostner Bit, Hole Saw Hole needed for stick to poke up through bottom mount
Suzo (STC) 500 Joystick 1 3/4" & 1 1/8" holes Fostner Bit, Hole Saw Holes needed for stick to poke up through bottom mount. Installation Details
Spinners
SlickStick Tornado Spinners 3/8" Drill Bit only shaft pokes out
GGG TurboTwist 2 Spinner 1 1/8" Fostner Bit, Hole Saw fits in a standard button hole