Mikes Mini Mame
- Project Type: Bartop/Countertop Arcade Cabinet
- Construction Method: Scratchbuilt
- Monitor Type: 15" LCD TFT
- Interface Type: UltraStik 360
- Special Controls: SpinTrak, AimTrak, UltraLux & Pac-Drive
- OS: Windows XP stripped down using nLite
- Front End: MaLa
Introduction
Hello everybody,
My name is Michael, I am 34, I live in Cyprus and I am a sys-admin by profession.
This is my second build after a restoration of an old cab back in 2005.
I decided on sharing the details for this latest arcade cabinet in case others might find the read useful or entertaining.
However, the real reason is to keep a record of the build process which for me, is actually more satisfying than finally owning the finished cabinet.
Work started in Nov 2010, with most of the electronics sourced in advance from various locations.
This page will be getting updated following the actual build which in turn heavily depends on my sparce spare time. (so be patient...)
Building the Mini Mame Cabinet
As you may have guessed from the category this is a Bartop/Countertop/Coffee-tabletop/Whichever-suits-you-besttop project.
The need for a mini, compact, carry-around cabinet rose firstly out of the obvious practical reasons from such a small size. Secondly, I found myself curious as to whether the functionality and look and feel of a full sized cab could be successfully scaled down to such a degree.
To help me better visualise my concept I have used a CAD tool which on numerous occasions proved invaluable. See design section below.
Design
Some X-ray Pics!
CAD Software
As you may have guessed, its Google Sketchup.
Functionality
Soon...
Color Scheme
Soon...
Hardware
Coming soon...
Computer Platform
I needed something with the following specs:
1. Minimum moving parts (low maintenance, low MTBF).
2. Low power consumption (less heat to dissipate).
3. Small size, to fit in the cab.
4. Powerful enough to run the basic games that I enjoy most.
Motherboard
I went for the Intel D510MO mini-itx form factor (170mm x 170mm) for the following reasons:
1. Small size that would fit the cab and allow room for other components.
2. Ability for passive cooling. (no cpu fan)
3. Extremely low power consumption. (less heat in a wooden cab is a good thing)
4. Can happily run the majority of the mame games without additional hardware. (i.e. graphics cards)
Full specs here.
Monitor
Samsung TFT Panel (Syncmaster). More soon...
Power Supply
Soon...
Hard Disk
Soon...
Marquee Lighting
USB light. More soon...
USB Extender
Soon...
Power Switch
Soon...
Lock Key
Soon...
Controls
Coming soon...
Software
Coming soon...
Woodworking
Let the building begin...
