Difference between revisions of "Soft-15khz"

From BYOAC OLD Wiki
Jump to navigation Jump to search
m (Resolutions in Detail: put the resolution lists in a simple table to conserve page space)
m (Custom display modes (Windows) - Soft-15khz moved to Soft-15khz)
(No difference)

Revision as of 12:29, 10 May 2007

About

The project “Soft-15KHz” is about reprogramming of videoadapters and/or their drivers to make them usable with normal Arcade monitors and/or TVs.

It does this by doing small changes to the windows registry to add typical arcade screen resolutions, as well as tweaking some existing ones, and locking out all others.


Status

The project is to be considered ALPHA Status but should work as intended.

Current Features

  • Frontend for Windows 98*, 2000 and XP
  • 15KHz Resolutions.
  • 25KHz Resolutions.
  • 31KHz Resolutions.
  • ATI Catalyst supported.
  • NVidia ForceWare supported.
  • Matrox Drivers supported.
  • 3Dfx Drivers supported.
* currently only supports ATI Catalyst on Windows 98

Planned Features

  • 35-38KHz Resolutions.
  • Other Drivers supported.

Development

The use of the project is totaly free, however developing is not, as it sometimes requires to buy certain stuff, most likely new or special video cards. So if you like the program feel free to donate some money via paypal to "sailorsat@animeger.de".


Screenshots and Downloads

For Screenshots and Downloads please look at this Thread.


Resolutions in Detail

Here is a list of resolutions currently used.

  • 15KHz
    • 240 x 240 @ 60Hz
    • 256 x 240 @ 60Hz
    • 256 x 256 @ 60Hz
    • 256 x 264 @ 60Hz
    • 304 x 240 @ 60Hz
    • 321 x 240 @ 60Hz *
    • 321 x 256 @ 60Hz *
    • 336 x 240 @ 60Hz
    • 352 x 256 @ 60Hz
    • 352 x 264 @ 60Hz
    • 352 x 288 @ 50Hz **
    • 368 x 240 @ 60Hz
    • 384 x 288 @ 50Hz **
    • 392 x 240 @ 60Hz
    • 401 x 256 @ 53Hz * **
    • 448 x 240 @ 60Hz
    • 512 x 240 @ 60Hz
    • 512 x 288 @ 50Hz **
    • 632 x 264 @ 56Hz **
    • 640 x 240 @ 60Hz
    • 640 x 288 @ 50Hz **
    • 640 x 240 @ 60Hz
    • 512 x 448 @ 60Hz Interlace
    • 512 x 512 @ 60Hz Interlace
    • 640 x 480 @ 60Hz Interlace
    • 720 x 480 @ 60Hz Interlace
    • 800 x 600 @ 50Hz Interlace **
    • 1024 x 768 @ 50Hz Interlace **
* "Fake" Resolution to avoid DirectX-Problems.
** Says 60Hz in Windows.
  • 25KHz
    • 448 x 384 @ 60Hz
    • 512 x 384 @ 60Hz


  • 31KHz
    • 512 x 448 @ 60Hz
    • 512 x 512 @ 60Hz
    • 640 x 480 @ 60Hz
    • 720 x 480 @ 60Hz
    • 800 x 600 @ 50Hz **
    • 1024 x 768 @ 50Hz **
** Says 60Hz in Windows.

Supported Drivers und Adapters

It should work with any NVidia (ForceWare 66.93 and up), ATI (Catalyst 2.5 and up), Matrox PowerDesk and 3Dfx Voodoo3/4/5 Driver, which themselfs support a large number of modern video adapters. Attention! The Windows default drivers are NOT compatible.

For a selection of tested drivers and adapters please look at : this Thread.


Frequently Asked Questions

For a list of frequently asked questions please look at this Thread.


Additional Information