BYOAC OLD Wiki - User contributions [en]

Building

2008-01-28T23:10:44Z

FhM:

__NOTOC__{{Portal|name=Design and Building}}
'''Building''' a [[Arcade Cabinet|cabinet]] from scratch, or even modifying an existing cabinet can be a daunting task for some. This page is designed to help you find your way through some difficult building challenges so you can complete your cabinet and start
playing.

==Design Considerations==
* [[Basic_guide_to_build_a_cabinet|Basic Cabinet Building Guide]]
* [[Controls]]
* [[Power Options]]
* [[Control_panel_hole_sizes|Control Panel Hole Sizes]]

== Design Software ==
Good construction work requires planning. This is also true for building a cabinet. With decent construction plans and button layout plans things are much easier. This section gives you a nice overview of software tools that can help you in constructing your own cabinet.
* [[Design applications]]
** [[Graphics software]]
** [[Technical design software]]

==Building Materials==
If you're planing on building an arcade cabinet from scratch, these are some of the materials you might end up using for various elements of the cabinet.
* [[Wood products]]
* [[Metal products]]
* [[Plastics]]
* [[Finishes]]
* [[T-Molding]]
* [[Electronic Components]]
* [[Bondo]]

==Tools==
Building your own arcade machine is no simple task and requires the correct tools as well as the knowledge of how to use each one correctly and safely. Hopefully you already own some of these tools and are well versed in their operation. If not, here's a few things you might want to add to your shopping list.
* [[Hand Tools]]
** [[Safety Equipment|Safety Equipment]]
** [[Marking Tools|Marking Tools]]
** [[Measuring Devices|Measuring Devices]]
** [[Sandpaper/Sanding Blocks|Sandpaper/Sanding Blocks]]
** [[Clamps|Clamps]]
** [[Sawhorses/Stands|Sawhorses/Stands ]]
** [[Working with Wire| Wire]]
** [[Wire Strippers/Crimpers|Wire Strippers/Crimpers]]
** [[Hammer/Screwdriver|Hammer/Screwdriver]]
** [[Fasteners|Fasteners]]
** [[Multimeter]]
** [[Soldering Iron]]
* [[Power Tools]]

==See Also==
* [[Basics]]
* [[Examples]]
* [[Cabinet Plans]]

[[Category:Index]]
[[Category:Portals]]
[[Category:Building]]

Building

2008-01-28T23:10:08Z

FhM:

__NOTOC__{{Portal|name=Design and Building}}
'''Building''' a [[Arcade Cabinet|cabinet]] from scratch, or even modifying an existing cabinet can be a daunting task for some. This page is designed to help you find your way through some difficult building challenges so you can complete your cabinet and start
playing.

==Design Considerations==
* [[Basic_guide_to_build_a_cabinet|Basic Cabinet Building Guide]]
* [[Controls]]
* [[Power Options]]
* [[Control_panel_hole_sizes]]

== Design Software ==
Good construction work requires planning. This is also true for building a cabinet. With decent construction plans and button layout plans things are much easier. This section gives you a nice overview of software tools that can help you in constructing your own cabinet.
* [[Design applications]]
** [[Graphics software]]
** [[Technical design software]]

==Building Materials==
If you're planing on building an arcade cabinet from scratch, these are some of the materials you might end up using for various elements of the cabinet.
* [[Wood products]]
* [[Metal products]]
* [[Plastics]]
* [[Finishes]]
* [[T-Molding]]
* [[Electronic Components]]
* [[Bondo]]

==Tools==
Building your own arcade machine is no simple task and requires the correct tools as well as the knowledge of how to use each one correctly and safely. Hopefully you already own some of these tools and are well versed in their operation. If not, here's a few things you might want to add to your shopping list.
* [[Hand Tools]]
** [[Safety Equipment|Safety Equipment]]
** [[Marking Tools|Marking Tools]]
** [[Measuring Devices|Measuring Devices]]
** [[Sandpaper/Sanding Blocks|Sandpaper/Sanding Blocks]]
** [[Clamps|Clamps]]
** [[Sawhorses/Stands|Sawhorses/Stands ]]
** [[Working with Wire| Wire]]
** [[Wire Strippers/Crimpers|Wire Strippers/Crimpers]]
** [[Hammer/Screwdriver|Hammer/Screwdriver]]
** [[Fasteners|Fasteners]]
** [[Multimeter]]
** [[Soldering Iron]]
* [[Power Tools]]

==See Also==
* [[Basics]]
* [[Examples]]
* [[Cabinet Plans]]

[[Category:Index]]
[[Category:Portals]]
[[Category:Building]]

Control panel hole sizes

2008-01-28T23:07:19Z

FhM:

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0
-FhM

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- style="background:navy; color:white"
|colspan="4" |Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
|Happ Sub-Miniature Pushbuttons
|5/16''
|
|
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw
|1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|- style="background:navy; color:white"
|colspan="4" |Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-style="background:navy; color:white"
|colspan="4" |Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-style="background:navy; color:white"
|colspan="4" |Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}

Control panel hole sizes

2008-01-28T23:05:56Z

FhM:

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0
-FhM

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- style="background:navy; color:white"
|colspan="4" |Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
|Happ Sub-Miniature Pushbuttons
|5/16''
|
|
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|- style="background:navy; color:white"
|colspan="4" |Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-style="background:navy; color:white"
|colspan="4" |Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-style="background:navy; color:white"
|colspan="4" |Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}

Control panel hole sizes

2008-01-28T23:02:58Z

FhM:

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0
-FhM

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- style="background:navy; color:white"
|Push Button Holes|||||||
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
|Happ Sub-Miniature Pushbuttons
|5/16''
|
|
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|- style="background:navy; color:white"
|Trackball Center Holes|||||||
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-style="background:navy; color:white"
|Joysticks|||||||
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-style="background:navy; color:white"
|Spinners|||||||
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}

Control panel hole sizes

2008-01-28T22:57:27Z

FhM:

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0
-FhM

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- style="background:navy; color:white"
| Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
|Happ Sub-Miniature Pushbuttons
|5/16''
|
|
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|- style="background:navy; color:white"
|Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-style="background:navy; color:white"
|Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-style="background:navy; color:white"
|Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}

Control panel hole sizes

2008-01-28T22:51:52Z

FhM:

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0
-FhM

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
|Happ Sub-Miniature Pushbuttons
|5/16''
|
|
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|-
|Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-
|Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}

Control panel hole sizes

2008-01-28T22:49:18Z

FhM:

Taken from the following thread by csa3d http://forum.arcadecontrols.com/index.php?topic=71031.0
-FhM

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|-
|Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-
|Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}

Control panel hole sizes

2008-01-28T22:48:13Z

FhM:

Taken from the following thread by csa3d

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|-
|Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-
|Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}
-csa

Control panel hole sizes

2008-01-28T22:46:29Z

FhM:

{|Width="100%" valign="top" border="1" cellspacing="0" cellpadding="3" style="background:white; color:black; border:1px solid silver;"
|- style="background:navy; color:white"
|'''Component'''
|'''Hole Size Required'''
|'''Recommended Tool'''
|'''Additional Notes'''

|- Push Button Holes
|-
| Happs Standard Pushbutton
| 1 1/8"
| Fostner Bit, Hole Saw
|
|-
| Happs Mini Pushbutton
| 1/2"
| Drill Bit
| fits styles A, B, and C
|-
| Leaf Buttons
|1 5/32
|Fostner Bit, Hole Saw |
1 5/32 is perfect but 1 3/16 will work
|-
|Atari Volcano Pushbutton
|29/64"
|standard drill bit
|-
|Standard Sanwa/Seimitsu buttons
|30mm
|
|
|-
|Small Sanwa buttons
|24mm
|
|
|-
|Trackball Center Holes
|-
|Betson 2.25" Trackball (lip exposed)
|2 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|Betson 2.25" Trackball (ball exposed only)
|1 15/16""
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose lip)
|3"
|Hole Saw
|Hole needed for lexan overlay
|-
|3" Happs Trackball Highball (expose lip)
|3 1/4"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Happs Trackball Standard (expose only ball)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|3" Betson Imperial Trackball (expose lip)
|2 7/8"
|Hole Saw
|hole needed for lexan overlay
|-
|Joysticks
|-
|UltraStick360 Joystick
|1 1/8"
|Fostner Bit, Hole Saw
|Hole needed for stick to poke up through bottom mount
|-
|Suzo (STC) 500 Joystick
|1 3/4" & 1 1/8" holes
|Fostner Bit, Hole Saw
|Holes needed for stick to poke up through bottom mount. Installation Details
|-
|Spinners
|-
|SlickStick Tornado Spinners
|3/8"
|Drill Bit
|only shaft pokes out
|-
|GGG TurboTwist 2 Spinner
|1 1/8"
|Fostner Bit, Hole Saw
|fits in a standard button hole
|}
-csa

Uk

2007-11-08T19:44:27Z

FhM: /* Arcade Cabinet Building Specific Information For The UK */

== Arcade Cabinet Building Specific Information For The UK ==
very much a work in progress

NOTE , no vendors should be added , the import duties section of this page will cover your purchase choices and the cost implication.

__TOC__

=== Products particular to the UK.===

Smartstrip [http://www.oneclickpower.com/]

=== Import Duties ===

being researched

note on import duties, gifts or presents are not subject to duties( seeking verification )

-Ideas for page

size guides us-uk
Dictionary of terms, us - uk?
link to currency converter?

KEYWORDS FOR SEARCHES ( to make this page appear in searches)
UK
United Kingdom
GB
Great Britain
England
Ireland
Scotland
Wales

[[Category:Index]]

Uk

2007-11-08T19:10:16Z

FhM: /* Arcade Cabinet Building UK Specific Information */

== Arcade Cabinet Building Specific Information For The UK ==
very much a work in progress

NOTE , no vendors should be added , the import duties section of this page will cover your purchase choices and the cost implication.

=== Products particular to the UK.===

Smartstrip [http://www.oneclickpower.com/]

=== Import Duties ===

being researched

note on import duties, gifts or presents are not subject to duties( seeking verification )

-Ideas for page

size guides us-uk
Dictionary of terms, us - uk?
link to currency converter?

KEYWORDS FOR SEARCHES ( to make this page appear in searches)
UK
United Kingdom
GB
Great Britain
England
Ireland
Scotland
Wales

[[Category:Index]]

Uk

2007-11-08T19:04:13Z

FhM: /* UK specific information */

== Arcade Cabinet Building UK Specific Information ==
very much a work in progress

NOTE , no vendors should be added , the import duties section of this page will cover your purchase choices and the cost implication.

=== Products particular to the UK.===

Smartstrip [http://www.oneclickpower.com/]

=== Import Duties ===

being researched

note on import duties, gifts or presents are not subject to duties( seeking verification )

-Ideas for page

size guides us-uk
Dictionary of terms, us - uk?
link to currency converter?

KEYWORDS FOR SEARCHES ( to make this page appear in searches)
UK
United Kingdom
GB
Great Britain
England
Ireland
Scotland
Wales

[[Category:Index]]